STM32MP1¶
The instructions here will tell how to run OP-TEE on one of the supported STM32MP1 boards.
Supported boards¶
Board Name |
Manufacturer |
Boot media |
Hardware Description |
---|---|---|---|
STMicroelectronics |
SDcard |
||
STMicroelectronics |
SDcard |
||
STMicroelectronics |
SDCard |
Build instructions¶
Follow the instructions at “Get and build the solution”.
Configuration switch PLATFORM
can be used to specify the target device
as listed in table below:
Board Name |
Build configuration directive |
---|---|
STM32MP157A-DK1 |
|
STM32MP157C-DK2 |
|
STM32MP157C-EV1 |
|
When the build completes, generated image file sdcard.img can be found
in the generated binary images directory ../out/bin/
from build
root path. The images is a GPT multipartition image you can raw copy
to the target SDcard using a tool like dd.
A usual short fecth/build/load shell sequence is like the one below:
$ repo init -u https://github.com/OP-TEE/manifest.git -m stm32mp1.xml
$ repo sync
$ cd build
$ make toolchains
$ make PLATFORM=stm32mp1-157C_DK2 all
$ dd if=../out/bin/sdcard.img of=/dev/sdX conv=fdatasync status=progress